KPC Precast a leading precast concrete manufacturer in Saudi Arabia has recently seen the completion of a major car-park facility in King Abdullah Financial District (KAFD) Riyadh s ambitious financial hub utilising full precast technology to address urban density challenges in the Saudi capital. Standing 12 storeys tall (ground 11) this structure is one of the largest of its kind in the kingdom. It was built using an end-to-end manufacturing model designed to eliminate the labour fluctuations and weather-related delays common in traditional site-cast construction. The latest car park facility delivered by KPC Precast is a masterclass in structural efficiency representing one of the largest and most complex applications of full precast technology in the Kingdom of Saudi Arabia says Eng Ehab Abu Salim CEO of KPC Precast. While traditional construction often falls victim to the unpredictability of weather delays labour fluctuations and material waste experienced with site-cast concrete KPC Precast navigated this project through a fully integrated lifecycle. This end-to-end philosophy allowed the firm to control the narrative from the first consultation and specialised engineering design to high-precision manufacturing and rapid on-site installation. We aren t just delivering components; we are delivering a high-performance system says the CEO. By integrating design with manufacturing we ensured that every element from the foundation all the way up the ground-plus-11 storeys aligned with sub-millimetre accuracy. Technical specifications The project utilised specialised engineering to balance the massive weight-bearing capacity with the need for open airy interiors thus maximising interior space and structural integrity. To achieve this KPC utilised long-span double-T slabs which are prestressed elements used to create column-free zones thus maximising parking capacity and improving the user experience for drivers; high-strength precast shear walls designed to provide lateral rigidity against wind loads for the vertical structure; and prestressed beams engineered to minimise the floor-to-ceiling profile allowing KPC to pack more utility into the vertical space without sacrificing safety or aesthetics. Alignment with Vision 2030 As Saudi Arabia marches toward the goals of Vision 2030 the construction industry is under pressure to deliver green infrastructure. KPC Precast says this project showcases how precast technology is inherently sustainable. The company reports that moving the construction process to a controlled factory environment resulted in a 25 per cent reduction in material waste and a significantly lower carbon footprint through optimised logistics. KPC Precast also notes that the thermal mass of high-grade precast concrete contributes to the building s energy efficiency a critical factor in the harsh desert climate of the Central Province. Landmark project Ranking as one of the largest precast parking structures in Saudi Arabia this project serves as a beacon for the giga-projects of the future. It proves that speed does not require a compromise in durability. The finish is sleek the engineering is precise and the reliability is absolute he says. For KPC Precast the KAFD project stands as a testament to its commitment to building the kingdom of tomorrow. In the fast-paced era of Vision 2030 KPC has proven it is not merely a participant in the industry it is leading the revolution he remarks. The landmark structure was officially opened last year. KPC Precast a key member of the Al Kifah Group has built a reputation for excellence in the precast concrete sector. With state-of-the-art manufacturing facilities in Dammam in the Eastern Province and Umluj in the Tabuk region to meet the environmental objectives sustainability requirements and a commitment to quality the company serves various sectors including residential commercial and infrastructure projects. As Riyadh prepares to host major global events and expand its financial hub the completion of this major car-park facility serves as a benchmark for the rapid-build projects currently reshaping the kingdom s landscape.
Read More
KPC Precast a leading precast concrete manufacturer in Saudi Arabia has recently seen the completion of a major car-park facility in King Abdullah Financial District (KAFD) Riyadh s ambitious financial hub utilising full precast technology to address urban density challenges in the Saudi capital. Standing 12 storeys tall (ground 11) this structure is one of the largest of its kind in the kingdom. It was built using an end-to-end manufacturing model designed to eliminate the labour fluctuations and weather-related delays common in traditional site-cast construction. The latest car park facility delivered by KPC Precast is a masterclass in structural efficiency representing one of the largest and most complex applications of full precast technology in the Kingdom of Saudi Arabia says Eng Ehab Abu Salim CEO of KPC Precast. While traditional construction often falls victim to the unpredictability of weather delays labour fluctuations and material waste experienced with site-cast concrete KPC Precast navigated this project through a fully integrated lifecycle. This end-to-end philosophy allowed the firm to control the narrative from the first consultation and specialised engineering design to high-precision manufacturing and rapid on-site installation. We aren t just delivering components; we are delivering a high-performance system says the CEO. By integrating design with manufacturing we ensured that every element from the foundation all the way up the ground-plus-11 storeys aligned with sub-millimetre accuracy. Technical specifications The project utilised specialised engineering to balance the massive weight-bearing capacity with the need for open airy interiors thus maximising interior space and structural integrity. To achieve this KPC utilised long-span double-T slabs which are prestressed elements used to create column-free zones thus maximising parking capacity and improving the user experience for drivers; high-strength precast shear walls designed to provide lateral rigidity against wind loads for the vertical structure; and prestressed beams engineered to minimise the floor-to-ceiling profile allowing KPC to pack more utility into the vertical space without sacrificing safety or aesthetics. Alignment with Vision 2030 As Saudi Arabia marches toward the goals of Vision 2030 the construction industry is under pressure to deliver green infrastructure. KPC Precast says this project showcases how precast technology is inherently sustainable. The company reports that moving the construction process to a controlled factory environment resulted in a 25 per cent reduction in material waste and a significantly lower carbon footprint through optimised logistics. KPC Precast also notes that the thermal mass of high-grade precast concrete contributes to the building s energy efficiency a critical factor in the harsh desert climate of the Central Province. Landmark project Ranking as one of the largest precast parking structures in Saudi Arabia this project serves as a beacon for the giga-projects of the future. It proves that speed does not require a compromise in durability. The finish is sleek the engineering is precise and the reliability is absolute he says. For KPC Precast the KAFD project stands as a testament to its commitment to building the kingdom of tomorrow. In the fast-paced era of Vision 2030 KPC has proven it is not merely a participant in the industry it is leading the revolution he remarks. The landmark structure was officially opened last year. KPC Precast a key member of the Al Kifah Group has built a reputation for excellence in the precast concrete sector. With state-of-the-art manufacturing facilities in Dammam in the Eastern Province and Umluj in the Tabuk region to meet the environmental objectives sustainability requirements and a commitment to quality the company serves various sectors including residential commercial and infrastructure projects. As Riyadh prepares to host major global events and expand its financial hub the completion of this major car-park facility serves as a benchmark for the rapid-build projects currently reshaping the kingdom s landscape.
KPC s swimming pool and Jacuzzi offerings can be customised to accommodate various preferences and spatial requirements ensuring an ideal fit for any environment says Ehab Abusalim CEO of Al-Kifah Precast Company. We offer a wide range of sizes and shapes of swimming pools and Jacuzzis to meet our clients requirements for various settings ranging from luxurious residences and villas to commercial settings like hotels. Our precast swimming pools and Jacuzzis are built using high-performance concrete and reinforced designs for long-lasting durability as we are dedicated to delivering in line with our motto Quality cast in concrete in every aspect of our products he adds. The CEO says KPC has the capability and capacity to manufacture swimming pools and Jacuzzis at both its facilities in Dammam in the Eastern Province and Umluj in the Tabuk region with the flexibility to deliver them to sites across the entire kingdom. Our production capabilities allow us to manufacture precast swimming pools and Jacuzzis on a large scale to fulfil the requirements of extensive projects such as mega and giga-scale developments. This means we can efficiently supply a significant quantity of high-quality swimming pools and Jacuzzis to accommodate the needs of large-scale construction projects across various sectors he explains. The quality of KPC s products and services as well as its capability to handle large-scale projects have already secured it prestigious clients like Red Sea Global through the collaboration of Abdullah Bintaleb for Swimming Pools Company he remarks. KPC is focused on using state-of-the-art technology while keeping abreast of the latest developments in the industry and advanced management methods to meet the expectations of the modern era. Its Dammam facility is located across a 118 000-sq-m premium industrial lot in New Industrial City and has been designed for casting storing and erecting projects of practically any size. This factory consists of three main production lines equipped with the state-of-the-art machinery for hollowcore slabs wall panels and skeleton products. KPC s product range includes hollowcore and double-tee slabs skeleton products wall panels concrete mattresses sleepers and bridge crossings boundary walls frame systems among other products. As part of its ongoing business development efforts and commitment to continuous improvement KPD has expanded its product portfolio to include new offerings with upcoming products being developed to focus on sustainability and offer green solutions as well as other innovative categories to meet client needs.
Read More
KPC s swimming pool and Jacuzzi offerings can be customised to accommodate various preferences and spatial requirements ensuring an ideal fit for any environment says Ehab Abusalim CEO of Al-Kifah Precast Company. We offer a wide range of sizes and shapes of swimming pools and Jacuzzis to meet our clients requirements for various settings ranging from luxurious residences and villas to commercial settings like hotels. Our precast swimming pools and Jacuzzis are built using high-performance concrete and reinforced designs for long-lasting durability as we are dedicated to delivering in line with our motto Quality cast in concrete in every aspect of our products he adds. The CEO says KPC has the capability and capacity to manufacture swimming pools and Jacuzzis at both its facilities in Dammam in the Eastern Province and Umluj in the Tabuk region with the flexibility to deliver them to sites across the entire kingdom. Our production capabilities allow us to manufacture precast swimming pools and Jacuzzis on a large scale to fulfil the requirements of extensive projects such as mega and giga-scale developments. This means we can efficiently supply a significant quantity of high-quality swimming pools and Jacuzzis to accommodate the needs of large-scale construction projects across various sectors he explains. The quality of KPC s products and services as well as its capability to handle large-scale projects have already secured it prestigious clients like Red Sea Global through the collaboration of Abdullah Bintaleb for Swimming Pools Company he remarks. KPC is focused on using state-of-the-art technology while keeping abreast of the latest developments in the industry and advanced management methods to meet the expectations of the modern era. Its Dammam facility is located across a 118 000-sq-m premium industrial lot in New Industrial City and has been designed for casting storing and erecting projects of practically any size. This factory consists of three main production lines equipped with the state-of-the-art machinery for hollowcore slabs wall panels and skeleton products. KPC s product range includes hollowcore and double-tee slabs skeleton products wall panels concrete mattresses sleepers and bridge crossings boundary walls frame systems among other products. As part of its ongoing business development efforts and commitment to continuous improvement KPD has expanded its product portfolio to include new offerings with upcoming products being developed to focus on sustainability and offer green solutions as well as other innovative categories to meet client needs.
KPC Precast a leading precast concrete manufacturer in Saudi Arabia has recently seen the completion of a major car-park facility in King Abdullah Financial District (KAFD) Riyadh s ambitious financial hub utilising full precast technology to address urban density challenges in the Saudi capital. Standing 12 storeys tall (ground 11) this structure is one of the largest of its kind in the kingdom. It was built using an end-to-end manufacturing model designed to eliminate the labour fluctuations and weather-related delays common in traditional site-cast construction. The latest car park facility delivered by KPC Precast is a masterclass in structural efficiency representing one of the largest and most complex applications of full precast technology in the Kingdom of Saudi Arabia says Eng Ehab Abu Salim CEO of KPC Precast. While traditional construction often falls victim to the unpredictability of weather delays labour fluctuations and material waste experienced with site-cast concrete KPC Precast navigated this project through a fully integrated lifecycle. This end-to-end philosophy allowed the firm to control the narrative from the first consultation and specialised engineering design to high-precision manufacturing and rapid on-site installation. We aren t just delivering components; we are delivering a high-performance system says the CEO. By integrating design with manufacturing we ensured that every element from the foundation all the way up the ground-plus-11 storeys aligned with sub-millimetre accuracy. Technical specifications The project utilised specialised engineering to balance the massive weight-bearing capacity with the need for open airy interiors thus maximising interior space and structural integrity. To achieve this KPC utilised long-span double-T slabs which are prestressed elements used to create column-free zones thus maximising parking capacity and improving the user experience for drivers; high-strength precast shear walls designed to provide lateral rigidity against wind loads for the vertical structure; and prestressed beams engineered to minimise the floor-to-ceiling profile allowing KPC to pack more utility into the vertical space without sacrificing safety or aesthetics. Alignment with Vision 2030 As Saudi Arabia marches toward the goals of Vision 2030 the construction industry is under pressure to deliver green infrastructure. KPC Precast says this project showcases how precast technology is inherently sustainable. The company reports that moving the construction process to a controlled factory environment resulted in a 25 per cent reduction in material waste and a significantly lower carbon footprint through optimised logistics. KPC Precast also notes that the thermal mass of high-grade precast concrete contributes to the building s energy efficiency a critical factor in the harsh desert climate of the Central Province. Landmark project Ranking as one of the largest precast parking structures in Saudi Arabia this project serves as a beacon for the giga-projects of the future. It proves that speed does not require a compromise in durability. The finish is sleek the engineering is precise and the reliability is absolute he says. For KPC Precast the KAFD project stands as a testament to its commitment to building the kingdom of tomorrow. In the fast-paced era of Vision 2030 KPC has proven it is not merely a participant in the industry it is leading the revolution he remarks. The landmark structure was officially opened last year. KPC Precast a key member of the Al Kifah Group has built a reputation for excellence in the precast concrete sector. With state-of-the-art manufacturing facilities in Dammam in the Eastern Province and Umluj in the Tabuk region to meet the environmental objectives sustainability requirements and a commitment to quality the company serves various sectors including residential commercial and infrastructure projects. As Riyadh prepares to host major global events and expand its financial hub the completion of this major car-park facility serves as a benchmark for the rapid-build projects currently reshaping the kingdom s landscape.
Read More
KPC Precast a leading precast concrete manufacturer in Saudi Arabia has recently seen the completion of a major car-park facility in King Abdullah Financial District (KAFD) Riyadh s ambitious financial hub utilising full precast technology to address urban density challenges in the Saudi capital. Standing 12 storeys tall (ground 11) this structure is one of the largest of its kind in the kingdom. It was built using an end-to-end manufacturing model designed to eliminate the labour fluctuations and weather-related delays common in traditional site-cast construction. The latest car park facility delivered by KPC Precast is a masterclass in structural efficiency representing one of the largest and most complex applications of full precast technology in the Kingdom of Saudi Arabia says Eng Ehab Abu Salim CEO of KPC Precast. While traditional construction often falls victim to the unpredictability of weather delays labour fluctuations and material waste experienced with site-cast concrete KPC Precast navigated this project through a fully integrated lifecycle. This end-to-end philosophy allowed the firm to control the narrative from the first consultation and specialised engineering design to high-precision manufacturing and rapid on-site installation. We aren t just delivering components; we are delivering a high-performance system says the CEO. By integrating design with manufacturing we ensured that every element from the foundation all the way up the ground-plus-11 storeys aligned with sub-millimetre accuracy. Technical specifications The project utilised specialised engineering to balance the massive weight-bearing capacity with the need for open airy interiors thus maximising interior space and structural integrity. To achieve this KPC utilised long-span double-T slabs which are prestressed elements used to create column-free zones thus maximising parking capacity and improving the user experience for drivers; high-strength precast shear walls designed to provide lateral rigidity against wind loads for the vertical structure; and prestressed beams engineered to minimise the floor-to-ceiling profile allowing KPC to pack more utility into the vertical space without sacrificing safety or aesthetics. Alignment with Vision 2030 As Saudi Arabia marches toward the goals of Vision 2030 the construction industry is under pressure to deliver green infrastructure. KPC Precast says this project showcases how precast technology is inherently sustainable. The company reports that moving the construction process to a controlled factory environment resulted in a 25 per cent reduction in material waste and a significantly lower carbon footprint through optimised logistics. KPC Precast also notes that the thermal mass of high-grade precast concrete contributes to the building s energy efficiency a critical factor in the harsh desert climate of the Central Province. Landmark project Ranking as one of the largest precast parking structures in Saudi Arabia this project serves as a beacon for the giga-projects of the future. It proves that speed does not require a compromise in durability. The finish is sleek the engineering is precise and the reliability is absolute he says. For KPC Precast the KAFD project stands as a testament to its commitment to building the kingdom of tomorrow. In the fast-paced era of Vision 2030 KPC has proven it is not merely a participant in the industry it is leading the revolution he remarks. The landmark structure was officially opened last year. KPC Precast a key member of the Al Kifah Group has built a reputation for excellence in the precast concrete sector. With state-of-the-art manufacturing facilities in Dammam in the Eastern Province and Umluj in the Tabuk region to meet the environmental objectives sustainability requirements and a commitment to quality the company serves various sectors including residential commercial and infrastructure projects. As Riyadh prepares to host major global events and expand its financial hub the completion of this major car-park facility serves as a benchmark for the rapid-build projects currently reshaping the kingdom s landscape.
KPC s swimming pool and Jacuzzi offerings can be customised to accommodate various preferences and spatial requirements ensuring an ideal fit for any environment says Ehab Abusalim CEO of Al-Kifah Precast Company. We offer a wide range of sizes and shapes of swimming pools and Jacuzzis to meet our clients requirements for various settings ranging from luxurious residences and villas to commercial settings like hotels. Our precast swimming pools and Jacuzzis are built using high-performance concrete and reinforced designs for long-lasting durability as we are dedicated to delivering in line with our motto Quality cast in concrete in every aspect of our products he adds. The CEO says KPC has the capability and capacity to manufacture swimming pools and Jacuzzis at both its facilities in Dammam in the Eastern Province and Umluj in the Tabuk region with the flexibility to deliver them to sites across the entire kingdom. Our production capabilities allow us to manufacture precast swimming pools and Jacuzzis on a large scale to fulfil the requirements of extensive projects such as mega and giga-scale developments. This means we can efficiently supply a significant quantity of high-quality swimming pools and Jacuzzis to accommodate the needs of large-scale construction projects across various sectors he explains. The quality of KPC s products and services as well as its capability to handle large-scale projects have already secured it prestigious clients like Red Sea Global through the collaboration of Abdullah Bintaleb for Swimming Pools Company he remarks. KPC is focused on using state-of-the-art technology while keeping abreast of the latest developments in the industry and advanced management methods to meet the expectations of the modern era. Its Dammam facility is located across a 118 000-sq-m premium industrial lot in New Industrial City and has been designed for casting storing and erecting projects of practically any size. This factory consists of three main production lines equipped with the state-of-the-art machinery for hollowcore slabs wall panels and skeleton products. KPC s product range includes hollowcore and double-tee slabs skeleton products wall panels concrete mattresses sleepers and bridge crossings boundary walls frame systems among other products. As part of its ongoing business development efforts and commitment to continuous improvement KPD has expanded its product portfolio to include new offerings with upcoming products being developed to focus on sustainability and offer green solutions as well as other innovative categories to meet client needs.
Read More
KPC s swimming pool and Jacuzzi offerings can be customised to accommodate various preferences and spatial requirements ensuring an ideal fit for any environment says Ehab Abusalim CEO of Al-Kifah Precast Company. We offer a wide range of sizes and shapes of swimming pools and Jacuzzis to meet our clients requirements for various settings ranging from luxurious residences and villas to commercial settings like hotels. Our precast swimming pools and Jacuzzis are built using high-performance concrete and reinforced designs for long-lasting durability as we are dedicated to delivering in line with our motto Quality cast in concrete in every aspect of our products he adds. The CEO says KPC has the capability and capacity to manufacture swimming pools and Jacuzzis at both its facilities in Dammam in the Eastern Province and Umluj in the Tabuk region with the flexibility to deliver them to sites across the entire kingdom. Our production capabilities allow us to manufacture precast swimming pools and Jacuzzis on a large scale to fulfil the requirements of extensive projects such as mega and giga-scale developments. This means we can efficiently supply a significant quantity of high-quality swimming pools and Jacuzzis to accommodate the needs of large-scale construction projects across various sectors he explains. The quality of KPC s products and services as well as its capability to handle large-scale projects have already secured it prestigious clients like Red Sea Global through the collaboration of Abdullah Bintaleb for Swimming Pools Company he remarks. KPC is focused on using state-of-the-art technology while keeping abreast of the latest developments in the industry and advanced management methods to meet the expectations of the modern era. Its Dammam facility is located across a 118 000-sq-m premium industrial lot in New Industrial City and has been designed for casting storing and erecting projects of practically any size. This factory consists of three main production lines equipped with the state-of-the-art machinery for hollowcore slabs wall panels and skeleton products. KPC s product range includes hollowcore and double-tee slabs skeleton products wall panels concrete mattresses sleepers and bridge crossings boundary walls frame systems among other products. As part of its ongoing business development efforts and commitment to continuous improvement KPD has expanded its product portfolio to include new offerings with upcoming products being developed to focus on sustainability and offer green solutions as well as other innovative categories to meet client needs.
No more news.
